A-STAND Hotmetal Lacquer
30 mL jar
A-STAND Hotmetal Lacquer
The A-Stand Hot Metal line has been formulated to simulate the iridescent burnt metal tones created by the high temperatures generated by aircraft jet engines. They can also be very useful to simulate this effect on exhaust pipes or any other metal element affected by heat and exhaust gasses. You must keep in mind that if you apply a larger amount of product, the effect will be more intense.
Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.
A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.
Remember that all lacquer paints contain toxic components and it is advisable to use a respirator for its application, and to spray these products in a well-ventilated area.
The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner MIG2013
